Author Topic: Valve cover and water pump pulley stamps  (Read 1316 times)

0 Members and 1 Guest are viewing this topic.

Offline 68 S Code

  • Newcomer
  • *
  • Joined: Mar 2010
  • Posts: 8
Valve cover and water pump pulley stamps
« on: June 22, 2011, 08:47:53 am »
I'm trying to finalize some of the detailing on my engine. Looking to rent from someone here the valve cover OK stamp and the water pump pulley stamp. Hate to have stamps made up only to use them once. i would rather pay someone a small rental fee and shipping to use them for one day and then ship them back to you. Is there anyone willing to help? Haven't posted much here but I'm a regular on Concourse Mustang Forum.

Offline 68 S Code

  • Newcomer
  • *
  • Joined: Mar 2010
  • Posts: 8
Re: Valve cover and water pump pulley stamps
« Reply #1 on: June 30, 2011, 11:01:29 pm »
Forum Member came through and made me a set. All said and done easier to buy them then mail them back and forth. Thanks Dave.

Offline thefordshow

  • Fanatic!
  • *****
  • Joined: Jan 2007
  • Location: Milton Ontario Canada.
  • Posts: 1,631
  • fordcountry@bell.net
Re: Valve cover and water pump pulley stamps
« Reply #2 on: July 02, 2011, 02:11:14 pm »
I've never seen an original "OK" stamped power by ford chrome valve cover? I've seen 100's of covers with no original signs of any stamping at all?  If some one has an original photo, may be they can post it?   Chris

Offline x-70option

  • Vendor
  • Fanatic!
  • *****
  • Joined: Jan 2004
  • Location: Detroit MI
  • Posts: 2,396
Re: Valve cover and water pump pulley stamps
« Reply #3 on: July 07, 2011, 09:07:14 pm »
I feel the same way on all the S's on 428CJ drivers heads !

Mark
P.S. How many have seen a 4 then a 5 years ago? 
Mark Haas
517 861 7630 cel

Offline 68 S Code

  • Newcomer
  • *
  • Joined: Mar 2010
  • Posts: 8
Re: Valve cover and water pump pulley stamps
« Reply #4 on: July 17, 2011, 10:08:30 pm »
Where does the part number get stamped on the waterpump pulley? on the outer face or the inside face? Near the outer edge or on the hub?

Offline sah62

  • Administrator
  • Fanatic!
  • *****
  • Joined: Nov 2003
  • Location: Virginia, USA
  • Posts: 6,830
    • Mustang 428 Cobra Jet Registry
Re: Valve cover and water pump pulley stamps
« Reply #5 on: July 18, 2011, 06:01:29 am »
Where does the part number get stamped on the waterpump pulley? on the outer face or the inside face? Near the outer edge or on the hub?

Take a look at the pictures (from the links) on this page:

http://www.428cobrajet.org/id-pulley.html
Scott Hollenbeck
Administrator, Mustang 428 Cobra Jet Registry
Owner, Muscle Car Research LLC
1970 R-Code Mach 1
2019 Lincoln MKZ 3.0T AWD
(more non-Ford stuff)

Offline 68 S Code

  • Newcomer
  • *
  • Joined: Mar 2010
  • Posts: 8
Re: Valve cover and water pump pulley stamps
« Reply #6 on: July 18, 2011, 02:35:59 pm »
Scott thanks. I took a stab in the dark and clicked on the part number and the pic came up. I would have almost done it this way but it would have been upside down. Thanks again.