Author Topic: Distributor Cap for 1970 CJ  (Read 211 times)

0 Members and 1 Guest are viewing this topic.

Offline my68gt

  • Newcomer
  • *
  • Joined: Mar 2018
  • Location: Cary, NC
  • Posts: 39
Distributor Cap for 1970 CJ
« on: May 17, 2018, 04:46:21 pm »
Which distributor cap is correct for a September 69 Metuchen built 428CJ.  Is it the AUTOLITE embossed cap or just the plain one with the "1", I have a distributor but no cap. I found one in the trunk with a bunch of other original parts that just has the "1" but have no idea if this is original. The distributor I have was not in the trunk.

Thanks
1965 Convertible Mustang (automatic)
1965 Coupe 289 HP (4 Speed)
1966 Coupe Pro-Street (in the works) (4 Speed)
1967 Shelby GT350 (4 Speed)
1968 Mustang GT S Code (4 Speed)
1970 CJ Mach 1 Q Code (4 Speed)

I like 4 speeds!

Offline J_Speegle

  • Past Registry Supporter
  • Fanatic!
  • *
  • Joined: Jan 2006
  • Location: Calif
  • Username: Jeff_Speegle
  • Posts: 2,489
    • http://www.geocities.com/MotorCity/6473/page2.html
Re: Distributor Cap for 1970 CJ
« Reply #1 on: May 17, 2018, 08:29:13 pm »
Your looking for one with AUTOLITE in the top of the cap. The one you have with a "1" will have a FoMoCo on the inside.

Offline my68gt

  • Newcomer
  • *
  • Joined: Mar 2018
  • Location: Cary, NC
  • Posts: 39
Re: Distributor Cap for 1970 CJ
« Reply #2 on: May 18, 2018, 08:05:18 am »
Thanks!
1965 Convertible Mustang (automatic)
1965 Coupe 289 HP (4 Speed)
1966 Coupe Pro-Street (in the works) (4 Speed)
1967 Shelby GT350 (4 Speed)
1968 Mustang GT S Code (4 Speed)
1970 CJ Mach 1 Q Code (4 Speed)

I like 4 speeds!