Author Topic: Track-Boss manifold - what are they worth?  (Read 602 times)

0 Members and 1 Guest are viewing this topic.

Offline Jiffy

  • Registry Supporter
  • Fanatic!
  • **
  • Joined: Apr 2004
  • Location: Melbourne, Australia
  • Posts: 6,066
Track-Boss manifold - what are they worth?
« on: June 25, 2018, 12:46:04 am »
Ended up with a Track-Boss manifold, appears to be VERY lightly used and probably cleaned. Port sizes are 4V - apparently cast that way or a nice port job. Marked "Bush Perf" on the thermostat housing. Supposed to be for a B2, but could be for a Clevor - any thoughts?

So - what is this worth, I need a value before I put in on the FOR SALE section?

Thanks in advance




« Last Edit: June 25, 2018, 02:41:43 am by Jiffy »

Offline blackthunder70

  • Vendor
  • Shadetree Mechanic
  • ***
  • Joined: Oct 2005
  • Location: australia
  • Posts: 383
Re: Track-Boss manifold - what are they worth?
« Reply #1 on: June 25, 2018, 03:23:47 am »
hi jeff
they sold for 395 new and fit a cleveland 2 v head
lots out there for sale
cheers
3 1970 mach1 r code
blue
orange
green
1 1970 mach 427 sohc
1 1970 scj mach 1 w code

Offline crossboss

  • Old Hand
  • ****
  • Joined: May 2010
  • Location: Los Angeles, CA. and Cypress (Houston), TX.
  • Posts: 770
Re: Track-Boss manifold - what are they worth?
« Reply #2 on: June 25, 2018, 09:20:28 am »
May I suggest you go over to the boss302 site and ask. Potential buyers over there...
<My old C.J. heap  aka  S-B Racing!
Current lifelong project: 1969 Mustang Fastback/FOX chassis, Powered by a modern Can-Am 494 (Boss 429), Kaase headed, Autolite 1425 cfm 'B' Inline carb, 6 speed, 4 wheel discs, ala Trans-Am style--Whew!

Offline Jiffy

  • Registry Supporter
  • Fanatic!
  • **
  • Joined: Apr 2004
  • Location: Melbourne, Australia
  • Posts: 6,066
Re: Track-Boss manifold - what are they worth?
« Reply #3 on: June 25, 2018, 09:38:34 am »
Yup, done that - good info, Thanks.
This one appears to have been ported to 4V size, dunno if that means it’s more or less desireable?

Offline crossboss

  • Old Hand
  • ****
  • Joined: May 2010
  • Location: Los Angeles, CA. and Cypress (Houston), TX.
  • Posts: 770
Re: Track-Boss manifold - what are they worth?
« Reply #4 on: June 25, 2018, 09:43:39 am »
Yup, done that - good info, Thanks.
This one appears to have been ported to 4V size, dunno if that means it’s more or less desireable?



Yes, it does have the 4V ports. On a Boss 302, you want to use the smaller ports for higher velocity…believe me I know from experience. Good luck with the sale!
<My old C.J. heap  aka  S-B Racing!
Current lifelong project: 1969 Mustang Fastback/FOX chassis, Powered by a modern Can-Am 494 (Boss 429), Kaase headed, Autolite 1425 cfm 'B' Inline carb, 6 speed, 4 wheel discs, ala Trans-Am style--Whew!

Offline ng8264723

  • Shadetree Mechanic
  • ***
  • Joined: May 2005
  • Posts: 435
Re: Track-Boss manifold - what are they worth?
« Reply #5 on: June 25, 2018, 07:06:15 pm »
I have a bunch of literature on that manifold if you need it

Offline Jiffy

  • Registry Supporter
  • Fanatic!
  • **
  • Joined: Apr 2004
  • Location: Melbourne, Australia
  • Posts: 6,066
Re: Track-Boss manifold - what are they worth?
« Reply #6 on: June 25, 2018, 09:07:13 pm »
chris - that would be great if you can share it?

Offline ng8264723

  • Shadetree Mechanic
  • ***
  • Joined: May 2005
  • Posts: 435
Re: Track-Boss manifold - what are they worth?
« Reply #7 on: June 27, 2018, 11:59:22 am »
Do you want me to mail it to you?
chris