Author Topic: interior finish question  (Read 357 times)

0 Members and 1 Guest are viewing this topic.

Offline corbins

  • Occasional Poster
  • **
  • Joined: Nov 2004
  • Location: central va.
  • Posts: 93
interior finish question
« on: January 28, 2019, 08:23:38 pm »
69 Mach, Metuchen built, 4/69, 4/spd non-air, non p/s car.  Changing form red to white interior. Is lower metal dash black or white ?  And does anyone have a correct color code for the interior white ?
thanks !!
Steve Corbin

Offline 67428GT500

  • Occasional Poster
  • **
  • Joined: Sep 2018
  • Location: N.E. Texas
  • Posts: 97
Re: interior finish question
« Reply #1 on: January 29, 2019, 12:01:16 am »
The metal is white.
Once you have tasted flight, you will forever walk the earth with your eyes turned skyward. For there you have been, and there you will always long to return.
"If It's Not Boeing, I'm Not Going!"

Offline sportyworty

  • Registry Supporter
  • Fanatic!
  • **
  • Joined: Feb 2005
  • Posts: 3,997
Re: interior finish question
« Reply #2 on: January 29, 2019, 08:57:16 am »
stays the same
8F91R577646  Black 4 Speed

Offline 67428GT500

  • Occasional Poster
  • **
  • Joined: Sep 2018
  • Location: N.E. Texas
  • Posts: 97
Re: interior finish question
« Reply #3 on: January 29, 2019, 09:16:46 am »
I was thinking '67-8. My Shelby is white.
Once you have tasted flight, you will forever walk the earth with your eyes turned skyward. For there you have been, and there you will always long to return.
"If It's Not Boeing, I'm Not Going!"

Offline corbins

  • Occasional Poster
  • **
  • Joined: Nov 2004
  • Location: central va.
  • Posts: 93
Re: interior finish question
« Reply #4 on: January 29, 2019, 10:29:34 am »
stays the same

Thanks... good pics. Any idea on a white paint code for the interior trim pieces ?
Steve Corbin

Offline Dave R.

  • Old Hand
  • ****
  • Joined: Jun 2014
  • Location: Fairfield, Ohio
  • Posts: 551
Re: interior finish question
« Reply #5 on: January 29, 2019, 10:50:26 am »
Steve, 3W for the Mach 1 white interior is what I come up with.    Dave R.
Currently:
1969 R code Mach 1 4 speed restoration. My occasional driver.
Formerly:
2000 GT 'vert 5 speed (her DD)
1998 plain jane 6 cyl. auto (her DD)
1974 fastback 4 cyl. auto ( her DD)
Seems to be a pattern here.

Offline 67428GT500

  • Occasional Poster
  • **
  • Joined: Sep 2018
  • Location: N.E. Texas
  • Posts: 97
Re: interior finish question
« Reply #6 on: January 29, 2019, 10:51:54 am »
15855. 69-73
Once you have tasted flight, you will forever walk the earth with your eyes turned skyward. For there you have been, and there you will always long to return.
"If It's Not Boeing, I'm Not Going!"

Offline 67428GT500

  • Occasional Poster
  • **
  • Joined: Sep 2018
  • Location: N.E. Texas
  • Posts: 97
Re: interior finish question
« Reply #7 on: January 29, 2019, 10:52:38 am »
3W is the trim code. Not the paint.
Once you have tasted flight, you will forever walk the earth with your eyes turned skyward. For there you have been, and there you will always long to return.
"If It's Not Boeing, I'm Not Going!"

Offline corbins

  • Occasional Poster
  • **
  • Joined: Nov 2004
  • Location: central va.
  • Posts: 93
Re: interior finish question
« Reply #8 on: January 30, 2019, 03:43:41 pm »
15855. 69-73
Thanks, is this a manufacturer's code ?  Like Dupont or PPG ?
Steve Corbin

Offline sportyworty

  • Registry Supporter
  • Fanatic!
  • **
  • Joined: Feb 2005
  • Posts: 3,997
Re: interior finish question
« Reply #9 on: January 30, 2019, 03:51:13 pm »
Rattle Can Scott Drake L-15855 - AccuMatch Interior Paints. Every Mustang Vendor including Summit stocks it.
8F91R577646  Black 4 Speed

Offline 67428GT500

  • Occasional Poster
  • **
  • Joined: Sep 2018
  • Location: N.E. Texas
  • Posts: 97
Re: interior finish question
« Reply #10 on: January 30, 2019, 11:15:16 pm »
Rattle Can Scott Drake L-15855 - AccuMatch Interior Paints. Every Mustang Vendor including Summit stocks it.

+1   Rattle can Vinyl dye and semi-gloss acrylic lacquer for fiberglass and metal. I had a custom paint mixed based off the OE color, but it wasn't cheap.


                                                                      -Keith
Once you have tasted flight, you will forever walk the earth with your eyes turned skyward. For there you have been, and there you will always long to return.
"If It's Not Boeing, I'm Not Going!"

Offline corbins

  • Occasional Poster
  • **
  • Joined: Nov 2004
  • Location: central va.
  • Posts: 93
Re: interior finish question
« Reply #11 on: February 08, 2019, 07:55:36 pm »
Thanks all for the info/suggestions. Moving forward :)
Steve Corbin

Offline Armond

  • Fanatic!
  • *****
  • Joined: Nov 2003
  • Location: Utah
  • Posts: 1,979
    • My home page
Re: interior finish question
« Reply #12 on: February 10, 2019, 01:00:04 am »
If you can spray and want to use the good stuff, the way it was done, give TCP global a call.  The correct PPG paint code for the lower dash is  DDL 32586 for the Charcoal black poly.  The outside plastic crash guards and the radio guards were done in flat Charcoal poly in DDL 32651. If your car is a package tray car, meaning no fold down, the package tray on a white interior car was the 32651 also.
 The white used for the rear interior panels etc is DDL 8775.   They no longer supply it in PPG, but they have their own house brand and can use these numbers to formulate the colors.  If you do use them, buy their Lacquer thinner.  Medium works great.  Mix it 1 part paint to 1 1/2 part thinner.    You have to buy a quart minimum per color, so it gets pricey.  Good luck either way.
9F01R141359 Winter blue GT 4 speed!!!!
9K45Q103601 a very cool Cobra Auto       
http://www.dagostinirestorations.com/

Offline corbins

  • Occasional Poster
  • **
  • Joined: Nov 2004
  • Location: central va.
  • Posts: 93
Re: interior finish question
« Reply #13 on: February 16, 2019, 08:48:57 am »
Thanks Armond-good info.
Steve Corbin