Author Topic: Bare metal and Ma is a no no. How does the Eastowwd bare metal hold up?  (Read 223 times)

0 Members and 1 Guest are viewing this topic.

Offline ng8264723

  • Shadetree Mechanic
  • ***
  • Joined: May 2005
  • Posts: 435
Things rust inside in Ma.  I love Epoxy primer.  What about eastwood on top of epoxy primer?

Offline 428 CJ hardtops

  • Fanatic!
  • *****
  • Joined: Jan 2007
  • Location: Mid West
  • Posts: 2,017
Re: Bare metal and Ma is a no no. How does the Eastowwd bare metal hold up?
« Reply #1 on: September 04, 2019, 08:30:50 pm »
A good dehumidifier would probably work as well or better .
had many 428 CJ and SCJ cars over the last 30 years.I currently own a 68 1/2 coupe and a 69 R code SCJ Coupe and a 70 R code SCJ Cougar Eliminator .I am looking for a 70 428 coupe if anybody knows of one for sale.

Offline ng8264723

  • Shadetree Mechanic
  • ***
  • Joined: May 2005
  • Posts: 435
Re: Bare metal and Ma is a no no. How does the Eastowwd bare metal hold up?
« Reply #2 on: September 04, 2019, 11:20:27 pm »
Really in Ma.
Umm no...

Offline LightWtJet

  • Shadetree Mechanic
  • ***
  • Joined: May 2004
  • Location: Ann Arbor, Mi.
  • Posts: 463
Re: Bare metal and Ma is a no no. How does the Eastowwd bare metal hold up?
« Reply #3 on: September 05, 2019, 08:42:41 am »
Belongs in Restoration section-
Not sure what you want-
Here is the Eastwood story on protecting bare metal-
About Eastwood After Blast Metal Prep
After Blast is designed to clean, degrease and etch freshly blasted or sanded metal prior to painting or powder coating. Use with a plastic spray bottle to liberally apply to the part, wipe and reapply until all contaminants are removed. The blend of aqueous cleaners and phosphoric acid properly cleans, etches the metal and leaves a zinc phosphate coating that is excellent for paint, primer or powder adhesion. Also protects the metal from flash corrosion for extended periods. Use on all your fresh cast iron, steel or aluminum components.
68 White Fastback- Body work done

Offline ng8264723

  • Shadetree Mechanic
  • ***
  • Joined: May 2005
  • Posts: 435
Re: Bare metal and Ma is a no no. How does the Eastowwd bare metal hold up?
« Reply #4 on: September 05, 2019, 01:33:52 pm »
East bare metal paint look alike in a can.  First apply epoxy primer to seal the metal and then apply the eastwood spray paint